To Consort website  |  Print page

User Tools

Site Tools


ps_firmware

This is an old revision of the document!


Firmware Power Supplies

The newest range of power supplies (EV1xx0, EV2xx0, EV3xx0) have the ability to be upgraded with improved firmware. Check this webpage to download the required software:Firmware loader

The firmware files to be programmed into the power supplies can be downloaded here below. For the easiest operation, choose to download to your computer into a sub folder of your documents folder named as follows: (Your Documents)\Consort\Firmware

Important

  • It is not possbile to convert a specific model (e.g. EV1450) into another model (e.g. EV2650).
  • It is not possible to install a hardware version other than the version of your device. e.g. do not try to install a firmware starting with 2.x into a device starting with version 1.x or vice-versa.
  • Do not interrupt the programming of the firmware. This could lead to unpredictable results and cause to have the device returned to factory.

Version 3.2
- Improved serial communication.
- Improved blockade interception at end of run.

EV1450
EV2230
EV2310
EV2320
EV2650
EV3020
EV3150
EV3330
EV3610
EV3620

Version 3.1
- BUGFIX: Correction calculation power values above 214 Watts.

EV3020
EV3150
EV3330
EV3610
EV3620

Version 1.9
- Several bug fixes.
- Last measured values of V/I/W are shown in the report at end of run.

EV2310
EV2650
EV3020

Version 1.6
- Correction kVh timer.
- Data menu allows to erase logged information.
- Several bug fixes.

EV1450

Version 1.4
- USB communication has been improved to improve erroneous communication significantly!
- Event driven data logging has been added!
- Several bug fixes.

EV1450
EV2230
EV2310
EV2320
EV2650
EV3020
EV3150
EV3330
EV3610

ps_firmware.1538387061.txt.gz · Last modified: 01/10/2018 09:44 by pieter