Differences

This shows you the differences between two versions of the page.

--- firmwareloader [02/08/2018 10:25]
pieter [Device]
+++ firmwareloader [02/08/2018 10:27]
pieter [Device]
@@ Line 19: / Line 19: @@
 [[http://www.consort.be/Downloads/Software/FirmwareLoader/publish.htm|Consort Firmware Loader]].
 === Device ===
-To be able install the firmware, your device needs to be programmed to the correct serial baud rate. Go into the configuration menu of the device, choose to modify the serial port settings and select the baudrate of **57600**. Go back to the measurement mode after it has been set correctly.
+To be able install the firmware, your device needs to be programmed to the correct serial baud rate. Go into the configuration menu of the device, choose to modify the serial port settings and select the baudrate of **57600**. Go back to the measurement mode after it has been set correctly. This method is not suitable for the power supplies, see next paragraph.
-If the firmware load program doesn't detect the device that way, you'll need to start the device with both arrow keys pressed in. When successful, nothing will appear on the display. If it does, retry to start. The software will recognize the device when properly set into the mode to load the firmware.
+If the firmware load program doesn't detect the device that way, you'll need to start the device with both arrow keys pressed in. When successful, nothing will appear on the display and you can release the arrow keys. If something does appear, retry to start. The software will recognize the device when properly set into the mode to load the firmware.
 ==== Procedure ====

Support website

User Tools

Site Tools

Differences

Page Tools