To Consort website  |  Print page

User Tools

Site Tools


Action disabled: source
c30xx_firmware

Firmware C3000 devices

The firmware can be upgraded as long as the current device version starts with the same number. e.g. A device with the version 1.x cannot be upgraded to a version starting with 2.x.

Find also more information on the installation of the software on this page: Firmware

Version 5.x

5.1

  • BUGFIX: 'Stack Pointer Overflow' occurances when using external communication via the serial port.
  • Improved handling of key controls via external serial communication.

Version 4.x

4.3

  • Additional possibility to print/send only µS units for conductivity measurements, this option is to be chosen in SERIAL PORT menu.
  • For C3050: correct representation of unit 'mVH' has returned in multichannel view for ORP measurements against Normal Hydrogen Electrode.

4.2

Version 3.x

3.5

  • The possibility to adjust the EC signal frequencies and to calibrate the EC zero points. This is meant only for specialised staff.

3.3

  • 12 pH buffer tables in memory. The former 7.00 pH table has been reintroduced.

3.2

  • Data to be printed can be limited to the displayed channel(s) only. See SETTINGS > SERIAL PORT > SEND = ALL/DISPLAY
  • Each printed line ends with the channel number of the line data.
  • The reference temperature is now also printed with the conductivity measurement.

3.1

  • Select 'Tref=0.0' in the calibration menu to disable the temperature compensation of a specific conductivity channel.

Version 2.x

2.8

  • C3050M Bug: The resistivity measurement returned to the conductivity measurement when connecting the electrode at the combined connector.

2.7

  • 12 pH buffer tables in memory. The former 7.00 pH table has been reintroduced.

2.6

  • Select 'Tref=0.0' in the calibration menu to disable the temperature compensation of a specific conductivity channel.
  • The reference temperature is now also printed with the conductivity measurement.
  • Data to be printed can be limited to the displayed channel(s) only. See SETTINGS > SERIAL PORT > SEND = ALL/DISPLAY
  • Each printed line ends with the channel number of the line data.

2.4

2.3

c30xx_firmware.txt · Last modified: 17/05/2018 13:41 by pieter